TECH SPECS
Interface
PCI-Express 5.0 x4, NVMe 2.0
Form Factor
M.2 2280
Total Capacity
2000GB
NAND
3D TLC NAND Flash
External DDR Cache
LPDDR4 4GB
Sequential Read speed
Up to 10,000 MB/s
Sequential Write speed
UP to 9,500 MB/s
Dimension
- SSD without Heatsink: 80 x 22 x 2.3 mm
- SSD with Heatsink: 92 x 23.5 x 44.7 mm Please refer to the file to check the heatsink incompatible list
Mean time between failure (MTBF)
1.6 million hours
Power Consumption (Active)
Read: <10W ; Write: <10W
Power Consumption (Idle)
<85mW
Temperature (Operating)
0°C to 70°C
Temperature (Storage)
-40°C to 85°C
Warranty
1. Limited 3-years or 1400TBW.
2. Limited warranty based on 3 years or 1400TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)
Note
• Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
• Performance may vary based on SSD’s firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
• Speeds based on internal testing. Actual performance may vary.
• 1GB = 1 billion bytes. Actual useable capacity may vary.
* To keep AORUS Gen5 10000 SSD from overheating, please adopt the motherboard build-in heatsink or Thermal Guard Xtreme heatsink to prevent throttling.
- Bảo hành 36 tháng hoặc 700TBW